Carburetor Mounting Rubber

To fit Dellorto ,Mikuni or Amal please check Dimensions or contact us.
 
 
 
Large end diameter of spigot is 40mm (centre line of rib is 5mm in from end face, total depth 13.5mm)
 
 
Small end diameter of spigot is 38mm (centre line of rib is 5mm in from end face total depth 14mm)


The rubber measures total length of 33.25mm.

Good Maintenance Tips:-

1. Make sure both inlet manifold and Carb/Throttle body are clean and dry before fitting.
2. Always use the wide type Jubilee clips as air can be sucked in if not tight or incorrectly fitted.
3. Do not over tighten the clips if in doubt change clips.